1. FEATURE AND ADVANTAGE:
DX- 2700Fully Automatic Roll Paper Production Line
This production line consists of Automatic Toilet Paper Maxi Roll Rewinding Machine, Double Channel Log Saw Machine and Semi-Automatic Multiple Rolls Packing Machine. It converts the jumbo roll into the finished rolls. The whole line work smoothly and run stable, saving the labor cost and reducing the labor strength, it’s best choice for the producing hygienic paper products.
1.1 PARAMETER
SUITABLE JUMBO ROLL
| 1.：Double plies quantitative: 16-20g/m2 high moisture strong paper;
|
2. Jumbo roll diameter: 1800mm
| |
3. Jumbo roll width: 2850mm) | |
4. Jumbo roll core diameter: 76mm | |
Reeling finished product
| 1. Finished product: 100-250mm
|
Paper delivery unit | 1.1. Two-plies paper feeding stand, each layer of paper is conveyed by a wide flat belt |
2. . Jumbo roll and right manual adjustment, pneumatic paper feeding function.
| |
3. Adopt wall panel type independent drive | |
4. Buyer provided their own crane | |
5 Adopt point-to-point glue system, which evenly transmits glue to the steel roller | |
Lamination unit
| 1. Automatic glue supply
|
The glue roller is: 2650mm | |
Outside transmission
| 1. Independent frequency conversion.
|
2. Independent motor, independent transmission. | |
3. The whole machine is driven by timing belt. | |
Dividing cutting unit
| 1. Production speed: 300 m/min acceptance speed: 200-250 m/min.function.
|
Control unit
| 1. JIANGCHEN motor |
1.2 DX-C220-2L LOG SAW
Technical parameter
2. Parameter
1 | Machine size
| L7800XW2000XH1880 |
2 | Feeding length | Less than 3,000 mm |
3 | Maximum roll cutting size (diameter*length) | Ø200mmX L600mm |
4 | Minimum roll size(diameter *length) | Ø70mmXL80mm |
5 | Design speed | 210Cut /min |
6 | Production rate | 200 Cut / min(according to product speed) |
7 | Cut paper way | Rotaryswingcircularknifemovementandcontinuousservocontrolled roll forward |
8 | Cut paper channel | 1 channel |
9 | Paper cutting knife diameter | C610nnn |
10 |
Grinding knife way | The cylinder propulsion grinding wheel contact round Knife to achieve passive grinding knife, grinding knife parameters can be through touch screen |
11 |
Grinding knife into | The round knife is automatically sharpened,and the Grinding knife grinding wheel is automatically fed,which can be adjusted through the touchscreen |
12 |
Roll paperlength adjustment | Through the touch screen control,the control accuracy is ± 2mm, and the adjustable cut length range is 60nnD-250iiin |
13 | motive power | Total poweris9.8KW |
14 | Minimum pressure requirement | 0.6Mpa |
15 | The weight of the machine | 2500Kg |
2. Single Wrapping Machine for the Kitchen Paper
Single Wrapping Machine for the Kitchen Paper
l Mode：DX-220, suitable product：Core/coreless kitchen roll/toilet roll Quotation and delivery date
Tech. parameter and standard configuration：
Item | Size（mm） | ||
Machine size | 8.58 | ||
Host outlook size X1 | Length | 3368 | |
Width | 1050 | ||
Height | 1500 | ||
Edge hot sealing overall size X1 【Standard comeout from the side】 | Length | 3200 | |
Width | 2168 | ||
Height | 1350 | ||
Belt outlook size X2 pcs | Length | 3000 | |
Width | 450 | ||
Height | 1080 | ||
Machine weight | 1680kgs | ||
Stable | Max. speed120Roll/min. | ||
Package range | Length | 90-285MM | |
Dia. | 50-130MM | ||
Package material detail data | Packaging film material: SPP double heat-seal film; Packaging film thickness: 0.018mm~0.025mm; Max. outer dia.of packaging film: ￠450mm; Diameter of packaging roll paper core: 70mm-75mm. Sealing margin no less than 20mm, sealing method is wheel clamping sealing by food pillow packaging machine.
| ||
Full loading power of entire machine about 8.2Kw ，Mainly including： Servo motor 1.0KWx1 0.75KWx1 0.4KWx3 AC motor 0.37KWx2 0.55KWx1 Heating unit：Vertical sealing 0.4KWx4 crossed sealing 0.5KWx4 Edge hot sealing part：2.4KWx2 | |||
Electrical component： | 1.0KW | ||
0.75KW | |||
0.4KW | |||
PLC | DELTA | ||
Power | 220V, X3/50HZ | Wiring required 5 coreX4 sm=3phases4wire+Ground wire | |
3. Fully Automatic Toilet Paper Bundling Package Machine.
※ Main performance and structural features:
※ Utilizes servo drive, touch screen, and PLC control system for convenient and quick parameter setting. Fully automated completion of feeding, sorting, bag opening, packing, corner insertion, and sealing.
Employs a central negative pressure management mode, effectively reducing energy consumption.
Sealing uses heating element with upper and lower constant temperature heating mode, fully meeting the needs of users with varying packaging material thicknesses, ensuring quality adaptability for various packaging materials, and producing aesthetically pleasing seals.
※ From bagging to sealing, side panels provide full protection, effectively preventing bag breakage.
※ The sealing plate and side panels work together to meet users requirements for packaging tightness.
※ Servo-controlled four-directional dynamic opening and closing bag-supporting mechanism effectively improves the stability of bag opening and filling.
Main tech. parameter
DX-Z20J Roll paper bundling packaging machine
The core advantage of this equipment lies in its functional units, which are centered around servo drive, photoelectric detection, and vacuum adsorption, complemented by cylinder-assisted protection, to achieve high-precision automated operation. Key processes such as paper sorting, bag retrieval, and bag pulling are adjusted in real-time through servo drive to meet operational requirements. The bag supporting and sealing units feature safety detection and protection, paired with specialized suction nozzles and suction cups to enhance efficiency and safety. The dual bag racks can switch automatically and come with multiple protections. The bag mouth forming size is adjustable, the sealing and cutting are precise, and waste disposal is controllable. Overall, it exhibits significant advantages in automation, flexibility, safety, and precision.
Item | Tech. Parameter |
Design speed | 18packs/min. |
Stable speed | 16packs/min.（according to the product size） |
Max. Package size | L680mm×W400mm×H135mm |
Single pack size range | L80-135mm width（dia.）90-130mm |
Package style | 2-3 row, each row 3-5bags |
Package specification | 4.6.8.9.10 |
Package mode | Vertical package |
Machine weight | 2300KG |
Entire machine power | 18KW |
Compressing air | 0.5Mpa |
Powr supply： | 380V50HZ |
Air flow | 1cube/min. |
Package Material | PE、APP double side heating sealing pre-bag |
Bag size requirement | Allow a 3-5mm allowance for each individual product, the dimensions of each individual product include the outer packaging film. |
